Greenhouse Heating Equipment: Waste Oil Furnace Models
Siebring Manufacturing, Inc
150 Heatwave Multi-Fuel Furnace
The 150,000 BTU Heatwave Multi-Fuel furnace offers simplicity and accessibility for easy care. The unit comes fully assembled and ready to set into place. The electrical, fuel source and chimney are the customer’s responsibility. The hourly usage is 1.10 gal./hr. of waste oil. The blower pushes air approx. 40 – 50 feet and gives a temp rise of 70 degrees. The unit should heat a 1500 to 2000 sq. ft. area at -10 degrees and hold 65 degrees inside.
See product specifications in the table at the bottom of this page.
Product Number
Price
825-0815
$11,380.00
TRUCK – FOB Iowa
250 Heatwave Multi-Fuel Furnace
The 250,000 BTU Heatwave furnace uses 1.75 gal./hr. of waste oil. The used oil is stored in the 270 gal. fuel tank. The tank allows the furnace to be out of the way of fumes and also gives a work area for draining filters. The oil fill door is large to accommodate a pail of oil being emptied. The furnace auxiliary pump is mounted on the uprights of the tank-furnace legs. The filter above the tank is a pot type filter with cloth strainers. The tank is equipped with a drain plug on each end and a hand pump to empty water from beneath the oil without emptying the oil storage. The tank is baffled and has two toe steps for easy service. The tank is usable with both the 150 and 250 Heatwaves. All furnaces require a 20 psi compressed air source for atomizing the used oil.
See product specifications in the table at the bottom of this page.
Product Number
Price
825-0825
$13,725.00
TRUCK – FOB Iowa
350 Heatwave Multi-Fuel Furnace
The 350,000 BTU Heatwave furnace is unique in its ability to be accessed easily for cleaning. The blower, mounted on top and equipped with an energy efficient motor, offers a 40% energy savings. Makes a small “Foot print” on the shop floor!
Heat can be piped or used most preferably as a horizontal air heat source for large buildings 40′ x 80′ in -10 to 65 degree interior temp. The unit will use 2.75 gal./hr. of waste oil. The annual maintenance is simple and requires cleaning of the fire box, disposing properly of any solid waste accumulations. Usually a light ash is all that remains.
See product specifications in the table at the bottom of this page.
Product Number
Price
825-0835
$15,035.00
TRUCK – FOB Iowa
Additional Greenhouse Heating Products
Product Description
Product Number
Wt.
Price
270 Gal Fuel Tank and Heater Support (Includes Oil Pump)
825-0850
700
$3,250.00
J Model Oil Pump (For Distance over 25 ft. horizontal and 10 ft. Lift) add to above price
825-0875
-
$150.00
Pump and Motor Assembly
825-0880
-
$815.00
Heatwave Specifications
MODEL: | HW150 | HW250 | HW350 |
Heat Range – BTU’s | 180,000 | 280,000 | 380,000 |
Fuel Use – USGPH | 0.6-1.33 | 1.33-2.0 | 2.6-3.2 |
Electrical Voltage | 115 volt | 115 volt | 115 volt |
Amp Draw | 14.9 | 15.2 | 18.2 |
Compressed Air | 2 CFM | 2.5 CFM | 3 CFM |
PSI | 15 | 20 | 30 |
Flue Size | 8″ | 8″ | 8″ |
Cabinet Size WxLxH | 32x40x26 | 36x52x34 | 36x54x48 |
Overall Width W/Burner | 44 | 48 | 40 |
Overall Length W/Burner | 60 | 74 | 66 |
Height | 30 | 38 | 85 |
Ductable | Yes | Yes | Yes |
Air Movement | Belt Driven Motor on all Models | ||
Blower CFM Free Air | 2600 | 3450 | 3800 |
Blower Motor HP | ¾ HP | 1 HP | 2 HP |
Plenum Dimensions | Straight Through Cabinet Design for Hanging | ||
Mounting | Ceiling Hung | ||
Weight W/Blower/Burner | 480 | 750 | 1125 |
Shipping Weight (FOB – George, IA) | 550 | 835 | 1170 |
Warranty | All Models – Parts 1 yr – Chamber 10yrs pro-rated | ||
Contact All-American Associates, Inc. for a quotation including QUANTITY DISCOUNTS and freight charges.